ADV

Coating with anti-corrosive and thermal insulating properties

Numastec Corrosion Protection #ADV is a fluid applied material incorporating anti-corrosion and heat reflecting in an extremely durable and adhesive coating. Is a topcoat rust inhibitor with an exceptional adhesion to aluminium, galvanized steel and chromate treated steel. Provides a protective coating film of superior flexibility and resistance to abrasion and impacts. Lifespan under normal conditions is more than 10 years.

  • Metal surfaces - corrosion protection
  • Concrete- reinforcement
  • UV stable topcoat

MAINTENANCE

Shelf life: 6 months

Storage: Do not store in direct sunlight or near high heat sources.

Storage temperature: Between 4.5 °С and 30 °С

Remarks: During long-term storage it is recommended to shake or to turn the pails upside down every 3 months in order to retard complete separation of solvents and solids.

Requires at least two hours of full sun drying time before it can withstand exposure to heavy dew or light rain.

Because this product is water based. application shall not begin during inclement weather; when precipitation appears imminent; when freezing conditions are imminent; or when freezing may occur within 24 hours.

QUICK FACTS

Colour Bright white (Custom colours available by special order)
Weight/litre 1,29 kg
Solids content In volume: 37%
In weight: 50%
Dry film thickness 200 microns
Coverage rate 3,6 m² /l
Prime pigments Titanium Dioxide
Aluminum Hydroxide
Solvent type Water
Flashpoint Non-flammable
Dr ying times
To touch 2-8 hours
Full dry 24 hours at 24°С

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents.

The substrate must be dust free and made rust free by means of sandblasting (Sa2, St2), high pressure water jetting (min. 600 Bars) or mechanical wire brush before application.

Roller Deep nap (2.5 em or longer) industrial roller
Airless spray Pressure: min. 200 bars. Discharge capacity: min. 8 1/min. Tip size: 0.6 mm to 0.8 mm. NEVER reduced in water.
Remarks Apply directly out of container. An application of minimum two coats of a 100 microns each is recommended for an optimum performance. Do not apply to surfaces over 95 °С.