Protective textured coating
A fluid-applied material incorporating heat
reflecting, refracting, and dissipating ceramic-filled technology in an extremely durable and adhesive coating.
MAINTENANCE
| Shelf life | 12 months |
| Storage | Do not store in direct sunlight or near high heat sources |
| Storage temperature | Between 4,5°С and 45°С |
| Remarks | During long-term storage it is recommended to shake or to turn the pails upside down every 3 months in order to retard complete separation of solvents and solids. |
HEALTH AND SAFETY
Numastec #5000 HB Textured is non-toxic. See Material Safety Data Sheet for more information.
QUICK FACTS
| Color | Standard: White (Available in standard 12 colours. Custom colours available by special order) |
| Weight/litre: | 1,27 kg |
| Solids content | In volume: 47% |
| In weight: 57% | |
| Dry film thickness | 380 - 500 microns |
| Coverage rate | 1,1 ²/l- 1,4 ²/l (will vary with desired texture) |
| Tensile strength | 0,76 Mpa |
| Prime pigments | Titanium |
| Solvent type | Water |
| Flash point | Non-flammable |
| Drying times | |
| To touch | 1-2 hours |
| Full dry | 48 hours at 24°С |
| Full cure | 21 days |
For best results, this material should be applied with textured spray equipment or hopper gun.
Tip size and air pressure will vary depending on the desired texture appearance, depth and coverage.
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents.
The substrate must be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressure water jetting (min. 600 Bars).
Rusted or bare metal surfaces must be treated with one of the Numastec Corrosion Protection products.
Masonry surfaces must be treated with Numastec CMCE Masonry Primer or 4000 Surface Conditioner.
.jpg)